Get in touch 07891 410 960
Central Heating • Bordon, Hampshire

Power Flushing & Heating Repairs in Bordon

Magnetic-filter & power-flush specialists — local team covering GU35 and surrounding areas.

Gas Safe registered (554328) Worcester Bosch accredited Free, no-obligation quotes

Full central heating installation in Bordon — boiler, cylinder, 8-10 radiators and modern controls — typically runs 3-5 working days on site, heating and hot water restored every evening. Larger 1960s-80s ex-MOD housing with system redesign run 5-8 days. Realistic timeline given at survey, not a "we'll be done by Friday" guess.

Why this matters in Bordon

Zoning a 1960s-80s ex-MOD housing in Bordon into upstairs/downstairs/annex separately is the single biggest comfort upgrade most homeowners haven't done. Wireless thermostats and motorised valves added to an existing system run £400-£900 fitted, payback inside 2-3 winters on running cost savings alone.

Usually back to you the same working day across GU35.

Central Heating for Bordon homeowners

Most central heating jobs we do in Bordon are for homeowners planning a long-term improvement: 12-year guarantees, smart controls, finance over 2-5 years. We design and price for that horizon, not a short-term cheapest-possible swap.

Local context

Bordon sits in East Hampshire District Council on the A325 corridor, roughly 1 miles north of Whitehill and within 6 miles of our base. We work the GU35 postcode daily for central heating, and most Bordon jobs are written up within 48 hours of survey.

Council
East Hampshire District Council
Postcode
GU35
Nearest A-road
A325
Nearest motorway
A3

What we promise

  • Fixed written quotes — no "from £X" pricing
  • Magnetic-filter & power-flush specialists
  • Same-day clean-up, dust-sheeted floors
  • Real East Hampshire District Council Hampshire office — drop in, we're not virtual

How we deliver central heating in Bordon

  1. 1

    Diagnose properly

    Thermal imaging, flow rate testing and inhibitor checks across the Bordon system — not guesswork.

  2. 2

    Quote honestly

    If a flush, balance or rad upgrade is the right answer, we'll say so. New boiler? We'll say that too.

  3. 3

    Clean delivery

    Floors covered, system isolated cleanly across GU35 homes without drama.

  4. 4

    Test & commission

    All zones balanced, inhibitor topped up, controls programmed, system signed off in writing.

Central Heating near Bordon

Nearby central heating coverage from Bordon — distances measured from the centre of town along the A325.

Whitehill · 1mi

Central Heating in Bordon — common questions

Do you fit unvented hot water cylinders in Bordon?+

Yes — G3 qualified and we fit Megaflo, Telford and Joule cylinders regularly across Bordon. Mains-pressure hot water on every tap, no loft tank, proper safety controls (T&P valve, expansion vessel, tundish, discharge route) fitted and certified. Reclaims the airing cupboard too.

Can you fit underfloor heating in a Bordon extension?+

Yes — wet underfloor heating laid into screed for new extensions, or low-profile retro-fit systems for existing rooms. We coordinate with builders and tilers across Bordon routinely, so it isn't a project you have to manage yourself. Particularly popular in modern apartments.

My Bordon radiators heat at the top but stay cold at the bottom — what's wrong?+

Classic sludge build-up. The iron oxide settles in the bottom of each radiator and blocks circulation. Fix is a power flush + magnetic filter retrofit + inhibitor top-up. Costs roughly £450-£650 in Bordon depending on rad count, and gets you back to a properly hot system.

Does my Bordon system actually need a power flush?+

Only when the diagnosis says so. We check the magnetic filter, run a thermal imaging sweep across the rads, and test inhibitor levels before recommending. Many Bordon systems just need a filter retrofit and a chemical clean — a third of the cost of a full flush. Common pattern in 1960s-80s ex-MOD housing.

Next step

Central heating done properly in Bordon: power flushes that actually flow, magnetic filters that get checked at every service, smart controls paired and tested before we leave. Sludge management built into every install.

Same engineer who quotes does the work — no door-to-door sales, no quote-and-run.

WhatsApp
Call nowFree quote