Central Heating Power Flush in Fleet
If your Fleet radiators are cold at the bottom, sludgy in the pipework or slow to warm up, a power flush is often the fix — but not always. We diagnose first with a magnetic filter check and a thermal imaging sweep, and only recommend a flush when the system genuinely needs one. A third of the Fleet homes we visit just need a chemical clean and a magnetic filter fitting — a third of the cost of a full flush.
Why this matters in Fleet (GU51)
Fleet sits in a hard water zone, so scale and sludge accumulate faster than the national average. Older 3-4 bed family homes off Reading Road on their second or third boiler are the most common flush candidates in GU51.
Power flush in Fleet — at a glance
- Small system (up to 6 rads)
- £395
- Standard family home (8-10 rads)
- £495-£550
- Larger system (12+ rads)
- £595-£650
- Diagnostic-only visit (no flush needed)
- £79
- Magnetic filter fit
- Included
Honest diagnostics in Fleet
- Thermal imaging sweep before quoting
- Chemical clean recommended where a full flush isn't needed
- Adey MagnaClean Pro 2 fitted as standard — 10-year filter warranty
- Written before/after report with images
Power flush FAQs for Fleet
How much does a power flush cost in Fleet?+
£395 for a small system (up to 6 radiators), £495-£550 for a typical 8-10 radiator family home, £595-£650 for larger systems. Includes chemical inhibitor, magnetic filter fit, and a written before/after report with thermal images.
How do I know my Fleet system actually needs a flush?+
Signs: cold at radiator bottoms, black sludge in filter, banging or bubbling noises, slow warm-up, boiler tripping on high return temperature. We diagnose free at survey — if a chemical clean will do, we'll say so and save you £250.
How long does a power flush take in Fleet?+
A day for a typical 8-10 radiator 3-4 bed family homes off Reading Road. Larger or unusually dirty systems occasionally run to 1.5 days. Heating and hot water restored end of the day.
Will a power flush damage old Fleet radiators?+
Very old radiators (30+ years) with existing pinhole corrosion can leak after a flush — the flush doesn't cause it, but it does reveal it. We inspect for age and thin spots at survey and flag anything at risk before starting.
Do you always fit a magnetic filter after a Fleet flush?+
Yes — Adey MagnaClean Professional 2 fitted as standard on every flush. Catches iron oxide before it re-contaminates the boiler and voids the manufacturer warranty. Not optional.
More Fleet guides
A power flush in Fleet should start with a diagnosis, not a sales pitch. Book a survey and we'll thermal-image the system, inspect the filter and tell you honestly what it needs — usually £395-£550, sometimes less.